PLA PLUS Filament


*Please note that this is a preorder.*

Compatible with: Cubicon Single Plus, Cubicon Style

Size of filament: 1.75mm

Net Weight: 1kg

Colours: White, Yellow, Orange, Red, Strong Red, Blue, Pine Green, Silver, Black


PLA/PLA PLUS filament is one of the two most commonly used filaments for 3D printing, alongside ABS. Many consider it to be easy to use.

Packaging, especially in terms of food, often require the use of PLA as it is appropriate for food contact. Other than packaging, the material can also produce bags, disposable tableware, upholstery, disposable garments, hygiene products and even diapers. Therefore, PLA is a safe material to use.

PLA PLUS filament is also an eco-friendly option, as it is a vegetable-based plastic material which commonly uses cornstarch as a raw material. PLA is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. It is an odorless filament. However, interestingly, many have reported that PLA does emit a slight odor, best described as sweet corn, pancakes or maple syrup – but it does not emit fumes like heated ABS.

In contrast to ABS, PLA tends to be less durable, more fragile, and more sensitive to heat than ABS. Its melting point is also relatively low at 150ºC. However, when cooling, this material contracts less than ABS. This makes it more resistant to warping and gives it good geometric stability during manufacturing. Hence, PLA is generally preferred for rapid prototyping where form is more critical than function.


Material: Eco-friendly material made from corn starch

Density: 1.24g/cm³


  • Biodegradable to H²O and CO²
  • More breakable compared to ABS, but does not break easily
  • Fewer cracks, contractions, and warping compared to ABS when printing large scale or easily contractible models
  • Gives off semi-sweet smell during printing
  • Glossier finish compared to ABS
  • Adhesion is outstanding and melting point is uniform
  • No hazards, safe for human use
  • Compatible with multiple FFF-type 3D printers
  • Certified by ISO 9001, DIN EN 13432:2000-12, SGS materials

Print Settings:

Nozzle Temperature: 190-220°C

Filament Diameter: 1.75mm (tolerance ± 0.05mm)

PLA PLUS Colours

White, Yellow, Orange, Red, Strong Red, Blue, Pine Green, Silver, Black