Sinterit Sandblaster

Sinterit Sandblaster

Professional Finish For Printouts

The Sinterit Sandblaster is designed for cleaning, polishing and finishing of printouts, using dry Abrasive Material. The handy equipment cleans the prints fast, in a completely safe way. The Sinterit Sandblaster makes use of compressed air and little glass balls to penetrate all of the corners of your model and highlight every detail.

Post-processing of SLS printed parts is an easy task. You don’t need to remove any supports, neither mechanically nor chemically. All you need to do is to get rid of spare powder connected to your printed parts. The best and cleanest method is to use compressed air and a sandblaster. With this device you will clean and polish the surfaces.

3D Printing Technology

3D Printing Technology

Selective Laser Sintering (SLS)

Materials

Materials

PA12 Smooth, Flexa Grey, Flexa Soft, Flexa Bright, TPE

Features of 3D Printer

Key Features

WiFi Connectivity, Resistive Colour Touch Screen 4", Easy Maintenance and Handling, Sinterit Studio Software

Parameters

  • Type: Manual
  • Working area: 410 x 310 x 200 mm (16.1 x 12.2 x 7.9 in)
  • Max. pressure: 0.86 MPa / 125 psi
  • Coupling: DN 7.2
  • Max. abrasive material capacity: 4.5 kg (9.9 lbs)
  • Dimensions: 480 x 370 x 360 mm (18.9 x 14.5 x 14.1 in)
  • Weight: 15 kg (33 lbs)
  • Illumination power: 6 W
  • Illumination Input voltage: 230 V / 50 Hz or 120 V / 60 Hz
  • Abrasive material: glass balls 200 μm
  • Required Air flow: 300 L/min
  • Required Pressure: 0.6 – 0.86 MPa (87 – 124.7 psi)